AISI 321 Stainless Steel Round Bars Specification
| ROUND BAR SPECIFICATION | ASTM A276 Round Bar, ASME SA276 Round Bar / ASTM A479 Round Bar ASME SA479 Round Bar |
|---|---|
| ROUND BAR POPULAR GRADES WE SUPPLY |
|
| ROUND BAR DIMENSIONS | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| ROUND BAR SIZES | Diameter: 3mm~800mm |
| ANGLE BAR SIZES | 3mm*20mm*20mm~12mm*100mm*100mm |
| SQUARE BAR SIZES | 4mm*4mm~100mm*100mm |
| FLAT BAR SIZES | Thickness: 2mm~100mm |
| Width: 10mm~500mm | |
| HEX BAR SIZES | 2mm~100mm |
| BILLET SIZE | 1/2″ to 495mm Diameter |
| RECTANGLES SIZE | 33mm x 30mm to 295mm x 1066mm |
| ROUND BAR FINISH | Bright, Polish, Bright, Rough Turned, Grinding, Centreless Ground, Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| ROUND BAR TOLERANCE | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| ROUND BAR SURFACE | Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
| ROUND BAR CONDITION | Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Annealed round bar |
| ROUND BAR TECHNIQUE | Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod |
| BAR TYPE | Drawn Bar, Rolled Bar, Forged Bar, GFM Forged Bar, Open Die Bar, Forged Stepped Shafts, Forged Flat Bar, Forged Square Bar |
| ROUNDBAR AVAILABLE IN FORM OF | Round, Rod, Precision Ground Bar, Square, Round Rod, Hollow, Hex (A/F), Triangle, Rectangle, Threaded, T-Bar, Half Round Bar, Flat Bar, Rings, Blocks, Billet, Ingot, I/H Bar, Angle, Channel Bar, Profiles, Forging Etc. |
321 Stainless Steel Equivalent
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 321 | 1.4541 | S32100 | SUS 321 | – | 08Ch18N10T | – | X6CrNiTi18-10 |
321 Stainless Steel Round Bars Mechanical & Physical Properties
| DENSITY | MELTING POINT | TENSILE STRENGTH | YIELD STRENGTH (0.2%OFFSET) | ELONGATION |
|---|---|---|---|---|
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Stainless Steel 321 Round Bars Chemical Composition
| GRADE | C | MN | SI | P | S | CR | TI | NI | N |
|---|---|---|---|---|---|---|---|---|---|
| SS 321 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.03 max | 17 – 19 | 5xC min 0.60% max |
9 – 12 | 0.10 max |
Trusted & Best company in India for Stainless Steel 321 Products.
Stainless Steel 321 Flat Bars Capabilities: The maximum length for ASTM A276 Stainless Steel 321 flat bars is 220 inches in the Stainless Steel 321 Bars with a maximum weight of 15,000 pounds.
Stainless Steel 321 Forged Round Bars Capabilities: The maximum length for forged round bars and hex bars is 420 inches, in the Stainless Steel 321 Bars with a maximum weight of 20,000 pounds, 220 inches.
Stainless Steel 321 Square Bars Capabilities: The maximum length for ASTM A276 Stainless Steel 321 square bars is 220 inches in the ASTM A276 Stainless Steel 321 Bars with a maximum weight of 15,000 pounds
Standard: ASTM A276,ASTM A479M,ASTM A582M,ASTM A314,ASTM A484M
Value Added services for Stainless Steel Round Bar:
The Difference Between Round Bar and Precision Ground Bar
Round bar is exactly as it sounds; a long, cylindrical metal bar. Round bar is available in many different diameters ranging from 1/4″ up to 24″.
Precision ground bar is manufactured through induction hardening. Induction hardening is a non-contact heating process which uses electromagnetic induction to produce the required heat. Centerless ground bar is typically produced by turning and grinding the surface to a specified size.
Precision Ground Bar, also known as ‘Turned Ground and Polished’ shafting, refers to round bars made with fine precision and high-quality steel. They are polished to ensure flawless and perfectly straight surfaces. The manufacturing process is designed for extremely close tolerances for surface finish, roundness, hardness, and straightness which ensures a long service life with reduced maintenance.
Stainless Steel Bar Stock – SS 321H Bright Bar, DIN 1.4541 Black Bar, AISI 321 Square Bar and 321 Stainless Steel Pump Shaft in Various Sizes and Thickness for sale in Stock
Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).
| 5.0 mm | 45.0 mm |
| 6.0 mm | 50.0 mm |
| 7.0 mm | 55.0 mm |
| 8.0 mm | 60.0 mm |
| 9.0 mm | 65.0 mm |
| 10.0 mm | 70.0 mm |
| 12.0 mm | 75.0 mm |
| 16.0 mm | 80.0 mm |
| 20.0 mm | 90.0 mm |
| 25.0 mm | 100.0 mm |
| 30.0 mm | 130.0 mm |
| 35.0 mm | 160.0 mm |
| 40.0 mm | 200.0 mm |
Quality & Inspection :
- Each ASTM A276 Stainless Steel 321 Round Bar is tested for size tolerance, Ovality, length and Roughness.
- EN10204/3.1 Certificate as per ADW0
- All required Mechanical and metallurgical tests are carried out at our works.
- Bundles of ASTM A276 SS 321 Round Bar are made of 500/1000kgs each packed in HDPE sheets.
- Container is fumigated before stuffing. All wooden box /blockes are also fumigated.
- All ASTM A276 Stainless Steel 321 Round Bar are free from any internal defects
- Each lot is tested and ensured that material is free from Radio active contamination.
ASTM A276 SS 321 Round Bar usage/ application
-
- Cryogenic storage tanks
- Valves, fasteners, springs, mandrels, tubing hangers
- Chemical processing
- Aerospace
- Liquid fuel rocket motor components
- Pollution-control equipment
- Nuclear reactors
- Well head completion equipment and blow out preventers (BOP’s)
